Author Topic: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0  (Read 47306 times)

0 Members and 1 Guest are viewing this topic.

Offline bcb

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
I am new to this software and cannot find a manual online. Can someone please tell me how to change the time? (In English please)

Offline Kimera

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 1.196
  • Karma: +42/-3
  • Kimera (Ars Gratia Artis)
    • View Profile
    • SIEMENS Enterprise Wiki
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #1 on: March 16, 2011, 08:16:26 am »
To setup System Time and System Date you should use the first system phone (as example: the system phone connected to the first Up0/E port of your HiPath communication system), so: *95 -> Username / Password -> Select Menu 19 -> Select Submenu 13 -> Insert 4 digits Time (HHMM), select "V" (OK) then next submenù (the 14) enter 6 digits date (DDMMYY), select "V" (OK) and you should hear the confirmation double tone from the system phone.

That's it.

Regards,
Kimera.
(Ethical) Hackers are not just skilled, they are lucky people and they are persistent people. It's a combination of all three.
"Die Lösung ist immer einfach, man muss sie nur finden" Alexander Solschenizyn

I'm all for being a Partner, and a Professional. But if you want me to sell your products...you need to scratch my back a little too.

Offline UKedd

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #2 on: June 21, 2011, 10:25:50 am »
Kimera,

I have a similar issue to BCB but I have access to the HiPath 3000 Manager software so expected to be able to set the date / time using the manager software. I have looked and I cannot see how to do it in the manager software.
I don't think we have a phone connected to the first UpO/E as I cannot get any of them to give me access to *95 function.
Do you know ow I can set the time on the system?
Any help greatly appreciated!

Offline Kimera

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 1.196
  • Karma: +42/-3
  • Kimera (Ars Gratia Artis)
    • View Profile
    • SIEMENS Enterprise Wiki
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #3 on: June 21, 2011, 11:15:17 am »
Of course.

Basically if your HiPath system doesn't have an Up0/E terminal connected on the first Up0/E system port as described above you could perform the same Assistant T management tasks by using a specific trick: accessing the system via the "Online" mode through the HiPath 3000 Manager E.

Connect to your system as usual then check the Online mode (pressing the Online button), once done will appear a an optiPoint fac-simile fully functional LCD consle with which you can interact as usual (like with a real phone except for the audio channel).

At this point follow the instructions given above and you will fix the date and time (you can also perform a lot of other tasks) very easily.

Regards,
Kimera.
(Ethical) Hackers are not just skilled, they are lucky people and they are persistent people. It's a combination of all three.
"Die Lösung ist immer einfach, man muss sie nur finden" Alexander Solschenizyn

I'm all for being a Partner, and a Professional. But if you want me to sell your products...you need to scratch my back a little too.

Offline UKedd

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #4 on: June 21, 2011, 11:53:17 am »
Hi,

Just tired this and got the message 'Blocked by Dependency' then the message 'User does not have the rights ....'

Any solution for this?

Many thanks

Offline Kimera

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 1.196
  • Karma: +42/-3
  • Kimera (Ars Gratia Artis)
    • View Profile
    • SIEMENS Enterprise Wiki
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #5 on: June 21, 2011, 12:09:13 pm »
Which user credentials (account) are you using ?

Regards,
Kimera.
(Ethical) Hackers are not just skilled, they are lucky people and they are persistent people. It's a combination of all three.
"Die Lösung ist immer einfach, man muss sie nur finden" Alexander Solschenizyn

I'm all for being a Partner, and a Professional. But if you want me to sell your products...you need to scratch my back a little too.

Offline UKedd

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #6 on: June 21, 2011, 12:50:30 pm »
Not sure how I check that but if I go to the change password function, the box that pops up says the following:
User Name 12345
User Group: Customer

In the Actual Rights Column most are greyed out except for :

Customer (common)
Customer (confidential)
Charge Admin


Does that help?

Offline Kimera

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 1.196
  • Karma: +42/-3
  • Kimera (Ars Gratia Artis)
    • View Profile
    • SIEMENS Enterprise Wiki
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #7 on: June 21, 2011, 01:13:31 pm »
Can you post (or send a PM with) a screenshot of the Security window you see ? ...how many accounts have you access (Login/Password) ? ...have you tried the standards ones (Service, Development) ? ...is this HiPath managed by a SEN Partner or not ? ...basically you should have the access rights to change the system date and time.

Regards,
Kimera.
(Ethical) Hackers are not just skilled, they are lucky people and they are persistent people. It's a combination of all three.
"Die Lösung ist immer einfach, man muss sie nur finden" Alexander Solschenizyn

I'm all for being a Partner, and a Professional. But if you want me to sell your products...you need to scratch my back a little too.

Offline UKedd

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #8 on: June 23, 2011, 03:49:29 pm »
Kimera,

Thanks for your help, I managed to trace the guy who setup the user permissions and have got the administrator password off him so its now sorted.
Thanks again.

Offline Kimera

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 1.196
  • Karma: +42/-3
  • Kimera (Ars Gratia Artis)
    • View Profile
    • SIEMENS Enterprise Wiki
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #9 on: June 23, 2011, 04:21:40 pm »
Glad to hear you've solved your issue; now, with the given (service) credentials, you should be able to manage your whole HiPath system (HiPath 3000 and HG1500) as you probably never did before...so Good Luck mate!

Regards,
Kimera.
(Ethical) Hackers are not just skilled, they are lucky people and they are persistent people. It's a combination of all three.
"Die Lösung ist immer einfach, man muss sie nur finden" Alexander Solschenizyn

I'm all for being a Partner, and a Professional. But if you want me to sell your products...you need to scratch my back a little too.

Offline ahmed.magdi

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #10 on: July 01, 2011, 07:59:30 pm »
You Can Change it *95 ---> 31994 ---> 31994 then ----> 52 time

Offline Mike

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #11 on: November 10, 2011, 05:53:02 pm »
Hi Guys,

I too am completely new to HiPatch 3000 Manager E v8 R5.70.  I had difficulty identifying the first up0/E, so Kimera's instructions for menu *95 didn't make sense for me.  I then connected to it via the online mode, but again did not see a menu option for *95 while in that mode.  Any thoughts?

Thanks,

Mike

Offline Mike

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #12 on: November 10, 2011, 06:01:00 pm »
Scratch that.  This newbie figured it out.  Thanks guys!

Offline akoscomp

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #13 on: November 29, 2011, 03:59:25 pm »
Hi,

I had the same problem. I can't set the time in my HiPath 3000.
I follow this instructions, I can enter with *95, and in 19 Display Text Menu, but in this menu, I can't find the 13 and 14 points for set time and date.
Any idea?

Offline jnzy111

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
    • View Profile
Re: How do you change the time in Hipath 3000/5000 Manager E V8 R0.0.0
« Reply #14 on: March 12, 2012, 11:59:07 pm »
Where is the "Online" mode button in Manager-E ?

I can't find it :-(