Its only in English but it sports designs for OpenStage BLF, OptiPoints and OptiSet E.

Those are from Siemens A&D its a SCALANCE series and it used for high requirements areas.

SCALANCE W-786 Access Point
    * Temperature
      The W-786 Access Points are particularly suitable for applications with high climatic requirements
      (from -40°C to +70°C).
    * Robustness
      The impact-resistant plastic housing provides protection against destruction in particular when used in public areas. The UV and salt spray resistance of the devices permit installation and operation of the Access Points e.g. in ports, offshore equipment or in container logistics.  The Access Points of the SCALANCE W-786 product line are fitted with up to 3 integral radio modules (W786-1 PRO, W786-2PRO, W786-3PRO).




SCALANCE W-784 Access Point
The SCALANCE W-784 Access Points and Ethernet Client Modules are especially suitable for space-saving integration into the control cabinet. They correspond in their functionality to the access points and Ethernet client modules of the SCALANCE W-788 product range and they have a wireless module. The access point versions can also be operated in Ethernet client mode. The access points are available in two versions:

    * W784-1 (functionally compatible with W788-1PRO)
    * W784-1RR (functionally compatible with W788-1RR)

and the Ethernet client modules are available in three versions:

    * W744-1 (functionally compatible with W744-1PRO)
    * W746-1 (functionally compatible with W746-1PRO)
    * W747-1 (functionally compatible with W747-1RR)

The outstanding features of the access points and Ethernet client modules of the SCALANCE W-784 product range include advanced data security thanks to WPA2/IEEE 802.11i and IEEE 802.1x (RADIUS), aluminum housing, degree of protection IP30, Ex approval (Zone2), and an expanded temperature range between -20°C and +60°C. In addition, the SCALANCE W-784 products are suitable for wall-mounting as well as for DIN-rail-mounting (35mm DIN) with the optional MS 2 mounting set, and for mounting on the S7-300 sectional rail.

Ce qualcuno che ha già fatto qualche certificazione?

Topic: HOOME e Cellulari
Meglio:
Topic: Compatibilità PDA/Cellulari WiFi su HOOME (FMC) [quindi chi scrive presuppone che si voglia parlare di Client SIP/VoWLAN/Infrastruttura WLAN e, forse, di HiPath MobileConnect]

Hai raggione ma comunque e da ripensare e vedere se la risposta porta discussione su un altro tema aprire un nuovo Topic.

fastbyte

Ciao a tutti ho visto diversi post che hanno iniziato con un concetto e sono arrivati non direttamente in offtopic ma forse sul un topic simile ma diverso, sarebbe ideale se la persona che risponde semplicemente aprirà un nuovo topic...

CSTA Browser v3.2

Hai ragione Kimera, sono proprio andato off-topic ma tu sai bene quanto tempo abbiamo cercato qualche soluzione per sostituire vecchio Caracas Link e finalmente siamo arrivati..... Cosa pensate meglio spostarlo in un altro topic?

Currently, VC4.1 (Hollywood) is at the Beta 3 milestone. This version is suitable for non-critical production use. Please put it through the ringer and report any bugs before the final release. This is the last beta release planned before VC4.1 (Hollywood) is released.

New in this release:

The major new features in this release, since VC4.0, include:
    * Fixes a couple of critical issues found during Beta 2. In particular, the installation of Beta 2 would cause issues in the system GRUB menu and had a problem with sudo permissions. Both of these issues are fixed.
    * Experimental: Intrusion Detection and Prevention
    * Experimental: Anti-virus
    * Increased support for SNMP MIBs and traps.
    * We added 'copy' and 'rename' commands to configuration mode. These commands should make it far easier for people to manage large lists as part of the configuration. Firewall and NAT rules are the two obvious examples that have been most problematic in the past. You can find more detail about the commands in the enhancement request.
    * BGP MD5 support has been added. See bug 2661 for more information.
    * Support for the Sangoma S518 ASDL card including configuration mode CLI.
    * Integrated drivers for the Sangoma A142 (dual-port) and A144 (quad-port) serial cards, providing X.21 and V.35 interfaces. Currently, only the drivers have been integrated. The CLI to configure the cards is not present and the cards must be configured directly in Linux.
    * More than 240 issues resolved.

For more informations read the original announcement here .

fastbyte