OpenPath

HiPath / HiCom => HiPath - Phones - (optiSet, optiClient, optiPoint, openStage) => Topic started by: Orhan on July 05, 2010, 10:29:49 am

Title: optipoint 420 std or economy compatible of Hipath 3750 V4 and HG1500 V2
Post by: Orhan on July 05, 2010, 10:29:49 am
hi
I need your helping if you have experince

optipoint 420 std & economy models compatible of Hipath 3750 V4 and HG1500 V2. if yes which firmware I have to use.
If you have this firmvare could you send me?
orhan.tekgur@orcom.com.tr

Thanl you in advance
Title: Re: optipoint 420 std or economy compatible of Hipath 3750 V4 and HG1500 V2
Post by: Kimera on July 05, 2010, 11:23:10 am
Yes, they're compatible with HiPath 3000 V4 but I think it should be better to upgrade your whole system to HiPath 3000 V6 (upgrading your HG1500 V2 to HG1500 V3.0 too) to fully benefit from using (post-2006) optiPoint 4x0 V5 R4 software version.

Your HiPath 3000 V4 (with HG1500 V2...) should accept (pre-2007) optiPoint 4x0 V5 R1.35.0 software version at best (with NetBook 3.08 at best).

If you have SEBA Access you will find all the relevant Release Notes and Loadware files for your system's devices.

Best regards,
Kimera.
Title: Re: optipoint 420 std or economy compatible of Hipath 3750 V4 and HG1500 V2
Post by: Orhan on July 05, 2010, 12:48:20 pm
yes I have right to access to SEBA but there is no relevant software that you mentioned. It may have cancelled because of older one.

there are the following software:
V5 (R5 and R6)
V1 (R2 and R3)

?f you have the relevant software you can send me by mail.

Thank you very much in advance