hello

Alessandro  it is right, let me explain:

• ISDN  backpack connector 8 with RJ45 was not connected in the right Hipath Expansion Box Slot, it should be conected in 4 but it was conected in 5.
• Backpack conector was the version for Internal digital telephones. For ISDN need to be crossed
• ISDN line must be defined as S0 Euro CO PMP. See attach where you find this option
• I had also ISDN 2 GSM Device by Topex. (ISDN Bri Gateway). On this device the PORT TE must be conected with STMD3 via crossover ISDN cable, and SYNC PORT (clock signal synchronization port) must be conected in ISDN device. Manual it is here: http://www.topex.ro/en/get_file?idFile=3112

I  have an Siemens Optipoint 500 Advance  for Reception and phone extension does not work. In Hipath Manager I can program numbers. It is connected to 500 Advanced via cable on the correct port. I need to make something special for extension to function?

Hello

I have 3 devices like: http://www.openvox.cn/bbs/attachments/month_1005/20100508_46e506ce9ef3d9f303f6ZFr3HWrhIot1.jpg , called Intracom NETMOD.
From our telephony provider I have 3 ISDN BRA , 2 with head number and MSN and 1 just with head number. I talked with provider and they say:  "we have made permanent modification on LAY1HOLD parameter on our device". I have sound tone with the ports AB1 and AB2, but no sound with S0 port. The S0 port it's connected via RJ45 cable in STMD3 port.

Please help me to undersand how to check if the lines are in HIPATH3800 and how to setup hipath to split the head number and msn number to ports (internal analogic or digital).

Thanks.