Author Topic: OpenScapeOffice MX V3 con telefono CISCO CP-6901  (Read 12079 times)

0 Members and 1 Guest are viewing this topic.

Offline Zanobini

  • Full Member
  • ***
  • Posts: 154
  • Karma: +2/-0
    • View Profile
OpenScapeOffice MX V3 con telefono CISCO CP-6901
« on: June 11, 2012, 02:58:26 pm »
Ciao a tutti, qualcuno di voi ha già sbattuto la testa sui CISCO CP-6901? Sono riuscito a mettere firmware SIP tramite TFTP e il file *.xml e sono riuscirto a registrarlo, ma quando lo chiamo da un telefono OpenStage il telefono Cisco suona ma alla risposta non ho fonia e quando provo a selezionare non seleziona.

Queso il contenuto del file xml:
<device xsi:type="axl:XIPPhone" ctiid="605">
<fullConfig>true</fullConfig>
<encrConfig>false</encrConfig>
<deviceProtocol>SIP</deviceProtocol>
<sshAccess>0</sshAccess>
<sshUserId>default</sshUserId> 
<sshPassword>user</sshPassword>
<devicePool> 
 <dateTimeSetting> 
    <dateTemplate>M/D/Ya</dateTemplate> 
    <timeZone>Central Europe Standard/Daylight Time</timeZone> 
    <ntps> 
         <ntp> 
             <name>10.50.120.1</name> 
             <ntpMode>directedbroadcast</ntpMode> 
         </ntp> 
    </ntps> 
 </dateTimeSetting> 
 <callManagerGroup> 
    <members> 
       <member priority="0"> 
          <callManager> 
             <ports> 
                <ethernetPhonePort>2000</ethernetPhonePort> 
                <sipPort>5060</sipPort> 
                <securedSipPort>5061</securedSipPort> 
             </ports> 
             <processNodeName>IP OPENOFFICE</processNodeName> 
          </callManager> 
       </member> 
    </members> 
 </callManagerGroup> 
</devicePool> 
<sipProfile>
 <sipProxies> 
    <backupProxy></backupProxy> 
    <backupProxyPort></backupProxyPort> 
    <emergencyProxy></emergencyProxy> 
    <emergencyProxyPort></emergencyProxyPort> 
    <outboundProxy></outboundProxy> 
    <outboundProxyPort></outboundProxyPort> 
    <registerWithProxy>true</registerWithProxy> 
 </sipProxies> 
 <sipCallFeatures>
    <cnfJoinEnabled>true</cnfJoinEnabled> 
    <callForwardURI>x--serviceuri-cfwdall</callForwardURI> 
    <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI> 
    <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI> 
    <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI> 
    <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI> 
    <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI> 
    <rfc2543Hold>false</rfc2543Hold> 
    <callHoldRingback>2</callHoldRingback> 
    <localCfwdEnable>true</localCfwdEnable> 
    <semiAttendedTransfer>true</semiAttendedTransfer> 
    <anonymousCallBlock>2</anonymousCallBlock> 
    <callerIdBlocking>2</callerIdBlocking> 
    <dndControl>0</dndControl> 
    <remoteCcEnable>true</remoteCcEnable> 
 </sipCallFeatures>
 <sipStack> 
    <sipInviteRetx>6</sipInviteRetx> 
    <sipRetx>10</sipRetx> 
    <timerInviteExpires>180</timerInviteExpires> 
    <timerRegisterExpires>3600</timerRegisterExpires> 
    <timerRegisterDelta>5</timerRegisterDelta> 
    <timerKeepAliveExpires>120</timerKeepAliveExpires> 
    <timerSubscribeExpires>120</timerSubscribeExpires> 
    <timerSubscribeDelta>5</timerSubscribeDelta> 
    <timerT1>500</timerT1> 
    <timerT2>4000</timerT2> 
    <maxRedirects>70</maxRedirects> 
    <remotePartyID>false</remotePartyID> 
    <userInfo>None</userInfo> 
 </sipStack>
 <autoAnswerTimer>1</autoAnswerTimer> 
 <autoAnswerAltBehavior>false</autoAnswerAltBehavior> 
 <autoAnswerOverride>true</autoAnswerOverride> 
 <transferOnhookEnabled>false</transferOnhookEnabled> 
 <enableVad>false</enableVad>
 <preferredCodec>g711alaw</preferredCodec> 
 <dtmfAvtPayload>101</dtmfAvtPayload> 
 <dtmfDbLevel>3</dtmfDbLevel> 
 <dtmfOutofBand>avt</dtmfOutofBand> 
 <alwaysUsePrimeLine>true</alwaysUsePrimeLine> 
 <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail> 
 <kpml>3</kpml>
 <natEnabled>false</natEnabled> 
 <natAddress></natAddress>
 <phoneLabel>605</phoneLabel>
 <stutterMsgWaiting>1</stutterMsgWaiting>
 <callStats>false</callStats> 
 <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts> 
 <disableLocalSpeedDialConfig>true</disableLocalSpeedDialConfig>
 <startMediaPort>16384</startMediaPort> 
 <stopMediaPort>70000</stopMediaPort>
 <sipLines>
    <line button="1">
       <featureID>9</featureID> 
       <featureLabel>605</featureLabel> 
       <proxy>IP OPENOFFICE</proxy>
       <port>5060</port>
       <name>605</name>
       <displayName>605</displayName> 
       <autoAnswer> 
          <autoAnswerEnabled>2</autoAnswerEnabled> 
       </autoAnswer> 
       <callWaiting>3</callWaiting>
       <authName>605</authName> 
       <authPassword>100378</authPassword> 
       <sharedLine>false</sharedLine>
       <messageWaitingLampPolicy>1</messageWaitingLampPolicy> 
       <messagesNumber>*0</messagesNumber> 
       <ringSettingIdle>4</ringSettingIdle> 
       <ringSettingActive>5</ringSettingActive>
       <contact>605</contact> 
       <forwardCallInfoDisplay> 
          <callerName>true</callerName> 
          <callerNumber>false</callerNumber> 
          <redirectedNumber>false</redirectedNumber> 
          <dialedNumber>true</dialedNumber> 
       </forwardCallInfoDisplay> 
    </line>   
   </sipLines>
 <voipControlPort>5060</voipControlPort> 
 <dscpForAudio>184</dscpForAudio> 
 <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy> 
 <dialTemplate>dialplan.xml</dialTemplate> 
</sipProfile>
<loadInformation>SIP6901.9-2-2-2</loadInformation>   
</device>

UCCP Service Hipath 4000
UCCP Service OpenScape Business

Offline Lucky

  • Hero Member
  • *****
  • Posts: 741
  • Karma: +14/-0
    • View Profile
Re: OpenScapeOffice MX V3 con telefono CISCO CP-6901
« Reply #1 on: June 11, 2012, 07:12:20 pm »
Codec utilizzati sull' openstage?

Offline Alessandro - Telcom

  • Sr. Member
  • ****
  • Posts: 418
  • Karma: +12/-0
    • View Profile
Re: OpenScapeOffice MX V3 con telefono CISCO CP-6901
« Reply #2 on: June 11, 2012, 08:25:13 pm »
@ Lucky: se ci attacca un altro telefono SIP al posto del Cisco funziona. Il problema quindi sta sul Cisco.
...Un vero guerriero della luce non sa di essere un guerriero della luce...

Offline Lucky

  • Hero Member
  • *****
  • Posts: 741
  • Karma: +14/-0
    • View Profile
Re: OpenScapeOffice MX V3 con telefono CISCO CP-6901
« Reply #3 on: June 11, 2012, 09:04:17 pm »
Normalmente il G711ALaw è abilitato sugli openstage, ma a me ad esempio hanno chiesto di forzare il G729.
Pensavo forse il cisco andava solo in G711 e l' openstage no.
Non é forse questione di udp o tls?
Cosa si vede con wireshark o ethereal?

Offline Alessandro - Telcom

  • Sr. Member
  • ****
  • Posts: 418
  • Karma: +12/-0
    • View Profile
Re: OpenScapeOffice MX V3 con telefono CISCO CP-6901
« Reply #4 on: June 11, 2012, 09:07:50 pm »
il G711 di default è abilitato su tutti i telefoni (che poi sia A oppure U dipende da dove sei, ma quello conta poco.)
So solo che da trace fatti non riceve l'ACKNOWLEDGE alla risposta, quindi secondo me Cisco non rispedisce tutto ad OSO in modo corretto...per il resto non so...
...Un vero guerriero della luce non sa di essere un guerriero della luce...

Offline Lucky

  • Hero Member
  • *****
  • Posts: 741
  • Karma: +14/-0
    • View Profile
Re: OpenScapeOffice MX V3 con telefono CISCO CP-6901
« Reply #5 on: June 11, 2012, 11:38:40 pm »
Bella bega.
Spero sia un esperimento?
Non so se ha un legame ma mi é capitato un problema simile tra una 3000 e un mediant.
Ho risolto casualmente disabilitando l' udp e riabilitandolo con relativi riavvii.